The 'M' display is for use in the kitchen. It is not possible to cook food when this screen is displayed. Press the レンジ (Range) button and hold for 2 seconds. A single beep sounds, the 'M' indicator goes off and the display is turned off.

The lamps of the corresponding options light up and flash during operation to inform you of the procedure.
The knobs in ① and ③ come out when pressed. When not in use, the knobs can be stored by pressing them in.

① Menu, Power and Temperature control knob - Use to set the 自動メニュー (Automatic Menu Options) 1-10, the final temperature and power output when heating up food and setting the temperature for oven cooking and simultaneous cooking (top and bottom shelves).

② Display - Open and close the door and display '0' before use.

③ Time and Finish knob.

• Use to set the heating time in the manual menu.
• Use for あたため (heating), 解凍 (defrosting) and setting the finish of 自動メニュー (Automatic Menu Options).

④ Manual Menu button - Use it to set the heating time and temperature according to the condition of the food and the desired result.

⑤ Automatic Menu Options - No heating time and temperature settings are required; 1-10 menu options are available:

⑥ あたため (Heating) - No heating time and temperature settings are required.

⑦ 解凍 (Defrost) - No defrost time setting required. To Semi-defrost press button twice.

⑧ スタート (Start)

• To start all cooking operations.
• Opening the door will stop the cooking process.

⑨ キャンセル (Cancel) - Use this function if you want to stop cooking in the middle of the cooking process or if you press the wrong key.

Note
If you want to check the cooking process in the middle of cooking, do not press the Undo button, but open the door to check the cooking progress. To restart the cooking process, press the スタート (Start) button.