Use the Auto/High button (1) to start the vacuum.

Switch to Auto mode to automatically adjust the suction power according to the amount of dust detected.

Switch to High mode to activate the highest suction power.

The Battery Lamp (2) will indicate low power by flashing a few times, signifying the need for charging.

When the battery is fully depleted, the lamp will flash a few times and automatically turn off.

Multiple flashes indicate abnormal machine operation.

The Dust Sensor Lamp (3) visually indicates the presence of debris and dust that are not easily visible to the naked eye (keratin, dander, mite, etc.).

The lamp flashes more rapidly to indicate higher levels of dust.

Press the OFF button (4) to stop vacuuming.

The vacuum automatically pauses after being kept away from surfaces for more than 5 seconds. It will resume when placed on a surface again and will continue until the OFF button is pressed.