Press the Power button (1) to turn on or off the dryer.

Use the Program dial (2) to choose the drying program of your choice, when arrows appear on the display screen (3).

Rotate the Program dial knob in either direction to run through various program options.

The program type will be displayed on the display screen.

Press the Start/Pause button (4) to begin the program.

Press button (5) for Extra Dryness mode. You may increase the dryness level by pressing the button multiple times until the desired dryness level is reached.

Press button (6) for Anti-crease mode. You may increase the duration of this cycle by pressing the button multiple times until the desired duration is reached.

Press button (7) to modify the load. Choose between full load, small load and partial mode.

Press button (8) to activate the Acoustic Signal. This will turn on a buzzer to indicate the end of the drying cycle.

Use the program selector knob to choose the Timed program and press button (9) to select a drying time from 30 minutes to 4 hours in 15-minute increments. After selecting the desired time, press the Select button (10) to confirm. Press the Start/Pause button to commence the drying process.

Press button (10) to opt for the Delayed Start function. Use the program selector knob to set the delay and press the Select button (9) to confirm. Press the Start/Pause button to commence the countdown for the delayed drying cycle - after the lapse of which, the drying cycle will begin.

Press the Start/Pause button (4) briefly to start or stop the cycle.

Press and hold the button to cancel an ongoing cycle.